Thursday, April 17, 2008

INCREASE BSNL BROADBAND TORRENT SPEED

Does your torrent downloads work properly? Is your µTorrent client downloading stuff at its maximum speed? Have people told you to “forward ports” and you never understand what they mean? Then this is the right article for you! In this post, I’ll explain how to remove the No incoming connectionsor the Unable to bind a listening socketsigns in the status bar of µTorrent and get the All connection are OK!sign.

This guide is mainly for BSNL Broadband (formerly Dataone) users with the UTStarcom UT3000R2U router. The instructions given in this guide may/may not work for other routers. So think before you experiment.

Method I:

1. Point your browser to http://192.168.1.1 (Note: Preferably use another browser, not the one that you are reading this post from)

2. Enter the both User Name and Password as admin and press OK.
You will see something similar to this:

3. Click on Advanced Options in the sidebar and select NAT under it.

4. You will see a field called DMZ Host IP Address:

5. Open Start Menu -> Run. Type cmd and press enter.

6. Type ipconfig /all. You will get something similar to this:

7. Search for your connection in this list and note down its IP Address. In my case, it was 192.168.1.2. Most probably, you will also get the same.

8. Enter this IP Address into the DMZ Host IP Address: field and press Save/Apply.

9. Click on Advanced Setup (Sidebar) and press Save/Reboot. Wait for a minute and connect again.

10. Open µTorrent and try downloading something. If it didn’t work, redo your steps. If still it doesn’t work (very low chances), try Method II.

Method II:

This is a fast and easy method.

1. Repeat first two steps from Method I

2. Click on Advanced Options in the sidebar and press the edit button for your connection. Most probably the first one in the table.

3. Click next for the ATM PVC Configuration.

4. Set the Connection Type to Bridging, leave Encapsulation Mode as LLC/SNAP-BRIDGING and press next.

5. Check Enable Bridge Service: (If unchecked) and press next.

6. Click on Save. Press Save/Reboot. Wait for a minute and connect again.

Congarts! Now their is nothing to prevent µTorrent from getting poor connections!

Hope this guide helped and please give some feedback.

Cheers!

3 comments:

Anonymous said...

Mate the address http://192.168.1.1
not working. I wish to increase My torrent speed. Can You plz mail me the entire tutorial or any alternative method at My email id sakshamkatyal@gmail.com. I shall be very thankful to You. You will be equally rewarded.

Renju Thomas John said...

thank u very much.....
1st method works 4 me
i need to check it out at unlimited time also.........

if works then u solved all my downloading problems

god bless u

vineeth said...

i havw entered wrong ip adress .. now i am not able to open the link u have posted . what to do now ?